Skip to content

CW profiles

Firmware 4.3 adds CW profiles to the radio. RimuSDR creates, copies, resets, deletes and loads them on the CW tab of the Profile Manager, and loads them from the side CW panel.

Requirements

CW profiles need radio firmware 4.3. On a radio without CW profiles, the CW tab of the Profile Manager and the CW Profile drop-down are hidden.

Manage CW profiles

Go to Profiles › Profile Manager... and choose the CW tab.

The list shows the CW profiles on the radio. The profile that is loaded is selected. Click a profile to select it, then use the buttons under the list:

Create
Creates a new CW profile. Type a name for it.
Copy
Opens the same name box as Create, with the selected profile's name and _copy filled in. Change the name if necessary.
Reset
Resets the selected profile, after you confirm.
Delete
Deletes the selected profile, after you confirm.

To load a profile, double-click it. A single click only selects it.

The CW tab has no Save button, because the radio has no command to save a CW profile.

Load a profile from the CW panel

The CW Profile drop-down is at the top of the side CW panel. Choose a profile to load it.

Import and export

Profiles › Import/Export Profiles... includes CW profiles. On the Import tab and on the Export tab, tick CW Profiles and select the profiles in the list below it.