Installing on Windows¶
RimuSDR is a fully supported Windows client with all core radio features available. RimuCAT is also available for Windows, to connect logging, contest and digital-mode software to your radio. RimuDAX is available for Windows as a TCI server.
Windows 10 and Windows 11 are supported, 64-bit only. RimuDAX needs Windows 10 version 1809 or later.
RimuDAX on Windows is a TCI server only
RimuDAX for Windows creates no sound devices and installs no driver. Your program connects to RimuDAX with TCI, one network connection on the same PC that carries the audio, frequency, mode and transmit control. You do not need a virtual audio cable or a virtual COM port tool.
Your program must support TCI. See DAX or TCI.
Download the installer¶
-
Open the Downloads page.
-
Download the Windows installers you need from the Windows (amd64) section.
The files are named for their version, for example
RimuSDR-1.1.17-Setup.exe,RimuCAT-1.1.17-Setup.exeandRimuDAX-1.1.17-Setup.exe. There is no 32-bit or ARM build. -
Check the download against its SHA-256 checksum.
The Downloads page shows a checksum for each file. Compare it against the file you received:
The two values must match. If they do not, download the file again.
Run the installer¶
-
Double-click
RimuSDR-<version>-Setup.exe. -
Follow the prompts.
-
Start RimuSDR from the Start menu.
Install RimuCAT¶
RimuCAT has its own installer. Install it on the PC that runs your logging or contest software. That can be the RimuSDR PC or a different PC.
-
Double-click
RimuCAT-<version>-Setup.exe. -
Accept the license agreement.
-
Keep Allow RimuCAT to accept connections from other computers on your local network selected if software on another PC will connect to RimuCAT.
This adds a Windows Firewall rule for RimuCAT on private and domain networks.
-
Start RimuCAT from the Start menu.
Set your network to Private
The firewall rule does not apply on a network that Windows classifies as Public. If other computers cannot connect to RimuCAT, set the network profile to Private in Settings › Network & internet.
See What RimuCAT does to set up its ports.
Install RimuDAX¶
RimuDAX has its own installer. Install it on the PC that runs your TCI programs. It needs Windows 10 version 1809 or later.
-
Double-click
RimuDAX-<version>-Setup.exe. -
Accept the license agreement.
-
Start RimuDAX from the Start menu.
The TCI server accepts programs on the same PC only, so the installer adds no firewall rule. To accept programs on other computers, see Programs on another computer.
To connect your first program, follow the quick start in Using TCI.
After installation¶
Next, activate your license. See the Activation Guide.
Activation works the same way as on Linux, and your license covers installations on either platform. See Activating your license for the 10-installation limit and for transferring a license between machines.
RimuCAT uses the activation of RimuSDR on the same PC. If RimuCAT runs on a PC without RimuSDR, install RimuSDR on that PC too and activate it there. That PC counts toward your 10 installations.
What is different on Windows¶
- Audio
- RimuSDR uses the standard Windows audio devices. RimuDAX for Windows does not create DAX virtual audio devices. Digital-mode and logging programs that support TCI get radio audio from the RimuDAX TCI server. See Using TCI.
- CAT control
- Provided by RimuCAT over TCP, UDP, or a hardware COM port. RimuCAT cannot create virtual serial ports on Windows. See RimuCAT on Windows.
- MIDI controllers
- Supported. See MIDI controllers.
- Focus Helper
- Returns focus to your logging application after RimuSDR takes it, which matters with loggers such as WriteLog. This is a Windows-only feature.
Uninstalling¶
Remove RimuSDR, RimuCAT and RimuDAX through Settings › Apps › Installed
apps, the same way as any other Windows application. Uninstalling RimuCAT
also removes its firewall rule. Your RimuCAT settings stay in
%LOCALAPPDATA%\rimu-systems\rimucat\, and the RimuDAX log stays in
%LOCALAPPDATA%\rimu-systems\rimudax\.